Post by xbjunk on Aug 24, 2014 14:23:21 GMT
Again another one from original poster Rema !
Updating Your Jtag/RGH To A Higher Dash Kernal
What you will need to a acquire first
1. Your CPU Key
a. You can find this by luanching XeLL (Pressing Eject to Turn on Console)
2. A USB Stick
3. Flash360 or Original Nand
http://ge.tt/api/1/files/6B05TJs/0/blob?download
4. XeBuild
http://www.homebrew-connection.org/xebuild-gui-2-091-16537-kernel-support-added/
a.Credit for all programs go to their creatos
5. Most Importantly a Jtag or RGH
Note: For Corona + Trinity motherboards, flash 360 might not work. Use Simple NAND Flasher 1.2 instead.
http://www.homebrew-connection.org/simple-360-nand-flasher-v1-2-by-swizzy-corona-4gb-nand-dump-and-write-support-added/
Now the work begins...
Step 1 (Acquiring your Backup Nand)
1. If you have a copy of your original Nand that you know is in working order, you can skip this step.
2. Download Flash360 and move it onto your usb.
3. Put the usb into your console and open the Flash360 folder with Xexmenu or Freestyle Dash.
4. Launch the Flash360.xex
5. After the program opens in your console press "X" then "A"
6. After it has completed 100% press "Back"
7. Flash360 has now made a copy of your console nand and can be put back into you computer.
Step 2 (Generating a Hacked Image)
1. Run XeBuild on your computer.
2. Press "Open" and open the copy of your nand from the Flash360 Folder.
a. The file name will be "flashdmp.bin"
3. Remember the "Output Path", this is where you will find you hacked image.
4. Enter your complete cpu key in the box that says "CPUKey: _______"
5. At the bottom right, press check KV
a. This will double check your cpu key.
6. Click generate hacked image.
7. Find the hacked image and copy back into the flash360 folder of your usb.
a. The file name will be "updflash.bin"
Step 3 (Flashing hacked nand onto console)
1. Plug the usb with the new hacked nand into your console
2. Run the Flash360.xex with Xexmenu or Freestyledash
3. Press "A" , the "B", then "Start", then "Start" again, then finally press "A"
4. When it has completed flashing your new nand, press "Back' then "Back" again, and stay in the menu
5. Press "Back " again and as the timer hits 0 and your xbox shuts off, Unplug Your Xbox
6. Wait 1 minute before rebooting
Warnings!
1. It is always good to have a backup of your nand and cpu key.
2. Nobody is responsible for what you do to your jtag but you.
3. Read carefully, re-reading as much as necessary.
4. Never hesitate to askquestions.
5. Before generating a hacked image double check that all the correct boxes are ticked.
6. Use your brain.
All credits goes to my buddy Ririe