Post by BL on Aug 13, 2014 20:47:38 GMT
Name : Watch Dogs
Languages : English, Spanish, Italian, French & German
Region: Region Free
Works on LT 2.0/ LT+ 3.0 = Yes
Minimum Dashboard Required : 16537
Release Date : 24-05-2014
DVD1 = Contains mandatory installation files. Can be installed on a USB flash drive.
DVD2 = Contains game content. Has to be used to play the game.
Installation Instructions:
LT Firmware Users:
Burn both ISOs to two separate DVDs. Insert DVD1 first to install the game's content and use DVD2 to play the game. You cannot transfer the game's files to your HDD using a USB drive. Both dvds need to be burnt in order to play this game.
Installing DVD1's content via USB drive:
Credit to chaos1781 from 360iso for uploading these files from his console.
1. Download the following content files of DVD1 (from any host)
2. Extract the above files using winrar or any similar software
3. You will get a folder called '555308B7' and inside that folder you will find two files called 'Installation 1' and 'Installation 2'.
4. Open Horizon. If you dont have horizon download it from the following link
www.horizonmb.com
5. Insert a Xbox Formatted USB drive in your PC and make sure its detected in horizon.
6. Drag and drop the two files you just downloaded (Installation 1 and Installation 2) onto horizon.
7. Horizon will ask you to pick a profile, click 'skip this step' . Look at the bottom right corner of the prompt for this option.
8. The transfer will now start. This might take some time as both these files are rather large.
9. When the transfer is done connect your USB to your console and either transfer the files to your console's internal HDD or simply use the USB itself. If you dont have an internal HDD just let the USB stay connected to your console and start DVD2. The game should recognize these files.
X360key Users:
Open DVD1 and install the mandatory content files and use DVD2 to play the game
JTAG/RGH Users:
1.Extract both DVD1 and DVD2 using Xbox backup creator or any similar program. You will then get the following files
DVD1
DVD2
2. Go to DVD1's extracted files and open the 'Installation 1' folder. Inside this folder you will see another folder called 'worlds'. Copy this worlds folder and paste it inside the extracted DVD2 files i.e. paste it next to the DVD2 files that you just extracted.
3. Now open DVD1's extracted files again and go inside the folder called 'Installation 2'. From this folder copy the six files and the folder and paste it next to DVD2's extracted files.
4. Go to the folder where you extracted DVD2's files. Delete the file called 'default.xex'.
5. Rename 'game.xex' to default.xex.
6. This is what your files should look like in the end
7. Now copy all these files to your HDD and FSD should detect the game or use XexMenu to start it.
Template for Posting Questions:
Any question that doesn't follow this template wont be answered.
Flashed Consoles:
Your current firmware version :
Your dashboard version:
Your method of burning? Truncating/Overburning or Burnermax burn :
Your Latest Imgburn Log (Imgburn -> Help -> Imgburn Logs) :
Abgx360 Log of your burnt disc:
Your Kprobe or Nero Disc Speed Scan results
Your Question/Problem (Please be as detailed as possible) :
JTAG/RGH Consoles:
Your dashboard version
Type of game rip : ISOrip or GOD container
Program used to play the game : XeXMenu, FSD or NXE dash
Screenshot of the game's files on your HDD
Your Question/Problem (Please be as detailed as possible):
X360Key Consoles:
Your dashboard version:
X360key firmware version:
Your Question/Problem (Please be as detailed as possible):
Languages : English, Spanish, Italian, French & German
Region: Region Free
Works on LT 2.0/ LT+ 3.0 = Yes
Minimum Dashboard Required : 16537
Release Date : 24-05-2014
DVD1 = Contains mandatory installation files. Can be installed on a USB flash drive.
DVD2 = Contains game content. Has to be used to play the game.
Installation Instructions:
LT Firmware Users:
Burn both ISOs to two separate DVDs. Insert DVD1 first to install the game's content and use DVD2 to play the game. You cannot transfer the game's files to your HDD using a USB drive. Both dvds need to be burnt in order to play this game.
Installing DVD1's content via USB drive:
Credit to chaos1781 from 360iso for uploading these files from his console.
1. Download the following content files of DVD1 (from any host)
SockShare
hidemylinks.net/p/34deef9a49
Mega
hidemylinks.net/p/5fffc73451
FireDrive
hidemylinks.net/p/c7dac763c2
hidemylinks.net/p/34deef9a49
Mega
hidemylinks.net/p/5fffc73451
FireDrive
hidemylinks.net/p/c7dac763c2
2. Extract the above files using winrar or any similar software
3. You will get a folder called '555308B7' and inside that folder you will find two files called 'Installation 1' and 'Installation 2'.
4. Open Horizon. If you dont have horizon download it from the following link
www.horizonmb.com
5. Insert a Xbox Formatted USB drive in your PC and make sure its detected in horizon.
6. Drag and drop the two files you just downloaded (Installation 1 and Installation 2) onto horizon.
7. Horizon will ask you to pick a profile, click 'skip this step' . Look at the bottom right corner of the prompt for this option.
8. The transfer will now start. This might take some time as both these files are rather large.
9. When the transfer is done connect your USB to your console and either transfer the files to your console's internal HDD or simply use the USB itself. If you dont have an internal HDD just let the USB stay connected to your console and start DVD2. The game should recognize these files.
X360key Users:
Open DVD1 and install the mandatory content files and use DVD2 to play the game
JTAG/RGH Users:
1.Extract both DVD1 and DVD2 using Xbox backup creator or any similar program. You will then get the following files
DVD1
DVD2
2. Go to DVD1's extracted files and open the 'Installation 1' folder. Inside this folder you will see another folder called 'worlds'. Copy this worlds folder and paste it inside the extracted DVD2 files i.e. paste it next to the DVD2 files that you just extracted.
3. Now open DVD1's extracted files again and go inside the folder called 'Installation 2'. From this folder copy the six files and the folder and paste it next to DVD2's extracted files.
4. Go to the folder where you extracted DVD2's files. Delete the file called 'default.xex'.
5. Rename 'game.xex' to default.xex.
6. This is what your files should look like in the end
7. Now copy all these files to your HDD and FSD should detect the game or use XexMenu to start it.
Template for Posting Questions:
Any question that doesn't follow this template wont be answered.
Flashed Consoles:
Your current firmware version :
Your dashboard version:
Your method of burning? Truncating/Overburning or Burnermax burn :
Your Latest Imgburn Log (Imgburn -> Help -> Imgburn Logs) :
Abgx360 Log of your burnt disc:
Your Kprobe or Nero Disc Speed Scan results
Your Question/Problem (Please be as detailed as possible) :
JTAG/RGH Consoles:
Your dashboard version
Type of game rip : ISOrip or GOD container
Program used to play the game : XeXMenu, FSD or NXE dash
Screenshot of the game's files on your HDD
Your Question/Problem (Please be as detailed as possible):
X360Key Consoles:
Your dashboard version:
X360key firmware version:
Your Question/Problem (Please be as detailed as possible):